LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Electronic Engine Control) >> Removal And Installation >> Charge Motion Control Valve (CMCV) - 4.6L (3V) >> Removal

Charge Motion Control Valve (CMCV) - 4.6L (3V): Removal

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the intake manifold. For additional information, refer to ENGINE - 4.6L (3V) .
  2. Remove and discard the 2 E-clips and disconnect the charge motion control valve (CMCV) linkages.
    3. NOTE: Bent shaft or damaged components will require the intake manifold to be replaced.
  3. Rotate each CMCV shaft by hand to verify that they do not stick or bind.
  4. Disconnect the CMCV electrical connector.
  5. Remove the 3 bolts, bracket and the CMCV.
scientia non olet · About LEMON Manuals