Normal Operation
WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
When the ignition switch is turned to the ACC position, fused battery voltage is sent to the Smart Junction Box (SJB) along circuit 1002 (BK/PK).
- DTC B1360 Ignition RUN/ACC Circuit Open - If during the on-demand self test the SJB does not receive the RUN/ACC input from the ignition switch, DTC B1360 will be set.
This pinpoint test is intended to diagnose the following:
- Fuse(s)
- Wiring, terminals or connectors
- Ignition switch
- SJB