LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Exterior Lighting System) >> Removal And Installation >> Hazard Flasher Lamp Switch >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel center finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
  2. Release the tabs and remove the hazard flasher lamp switch.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals