LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Front Suspension) >> Removal And Installation >> Wheel Studs >> Removal

Wheel Studs: Removal

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel bearing and hub assembly. For additional information, refer to Wheel Bearing and Wheel Hub .
  2. Using a press, remove the wheel stud from the wheel bearing and hub assembly.
    3. Fig 1: Identifying Wheel Stud From Wheel Bearing & Hub Assembly
    GF0000723Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals