LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Front Suspension) >> Removal And Installation >> Wheel Studs >> Installation

Wheel Studs: Installation

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a press, install a new wheel stud.
    2. Fig 1: Installing New Wheel Stud Using A Press
    GF0000724Courtesy of FORD MOTOR CO.
  2. Install the wheel bearing and hub assembly. For additional information, refer to Wheel Bearing and Wheel Hub .
scientia non olet · About LEMON Manuals