General Specifications
WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Clearance, Tolerance and Adjustments | |
| Differential pinion gear thrust washer thickness | 0.762-0.813 mm (0.030-0.032 in) |
| Differential side gear thrust washer thickness | 0.762-0.813 mm (0.030-0.032 in) |
| Maximum axle shaft end play | 0.762 mm (0.030 in) |
| Maximum differential case runout | 0.076 mm (0.003 in) |
| Pinion bearing preload | 1.8-3.3 N.m (16-29 lb-in) |
| Pinion flange runout | 0.25 mm (0.010 in) T.I.R. |
| Ring gear backlash | 0.203-0.304 mm (0.008-0.012 in) |
| Variation between teeth maximum backlash | 0.102 mm (0.004 in) |