LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Rear Drive Axle/Differential - Ford 8.8-Inch Ring Gear) >> In-Vehicle Servicing >> Differential Housing Cover >> Removal

Differential Housing Cover: Removal

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING .
  2. Remove the differential housing cover.
    1. Remove the 10 differential housing cover bolts and drain the lubricant from the axle housing.
    2. Remove the differential housing cover.
    3. Fig 1: Identifying Differential Housing Cover And Bolts
    GF0003075Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals