Air Conditioning Line (Peanut) Fitting: Connect

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

Clean all dirt or foreign material from the fittings.

NOTE: Use only the new O-ring seals. The use of any O-ring seals other than those specified in the Ford Master Parts Catalog may result in intermittent leakage during vehicle operation.

Install the O-ring seal.

Fig 1: Locating O-Ring Seal

Courtesy of FORD MOTOR CO.

NOTE: When correctly assembled, the male and female fittings should be flush.

Assemble the male and female fittings together.

Fig 2: Identifying Male And Female Halves Of Peanut Fitting

Courtesy of FORD MOTOR CO.