LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Engine System - General Information) >> General Procedures >> Connecting Rod-to-Piston Clearance

Connecting Rod-to-Piston Clearance

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools

Illustration Tool Name Tool Number
GF0000216Courtesy of FORD MOTOR CO.
 Feeler Gauge Set 303-D027 (D81L-4201-A) or equivalent
NOTE: Refer to the SPECIFICATIONS .
  1. Using the Feeler Gauge Set, measure the clearance between the connecting rod and the piston. Verify the measurement is within specification.
    2. Fig 1: Measuring Clearance Between Connecting Rod & Piston Using Feeler Gauge Set
    GF0040877Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals