Wiper Blade & Pivot Arm Adjustment
WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
- Cycle and park the windshield wipers.
- Verify that the RH and LH wiper blades are located at the specified position.
- If not within the specification, remove the wiper pivot arms and reposition to the correct location. For additional information, refer to Wiper Pivot Arm .
NOTE:
Make sure there is no mechanical binding in the linkage preventing the wiper arms from returning to the fully parked position.