LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Suspension System - General Information) >> General Procedures >> Ride Height Measurement >> Rear Ride Height Measurement

Rear Ride Height Measurement

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Ride Height Measurement
GF0046409Courtesy of FORD MOTOR CO.
Item Description
1 Ride height = 2 - 3
2 Measurement Point 2
3 Measurement Point 3
NOTE: Make sure that the vehicle is positioned on a flat, level surface and the tires are inflated to the correct pressure. Vehicle should have a full tank of fuel.
  1. To obtain rear ride height, measure the distance between points 2 and 3. For additional information, refer to SPECIFICATIONS .