LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (Automatic Transmission) >> In-Vehicle Servicing >> 2-3 Accumulator >> Removal

2-3 Accumulator: Removal

WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
    WARNING: Before servicing a vehicle equipped with a fire suppression system, depower the system by following the procedure in FIRE SUPPRESSION SYSTEM article. Failure to follow the instructions may result in serious personal injury.
  1. Remove the main control valve body. For additional information, refer to Main Control Valve Body .
  2. Remove the 2-3 accumulator piston retainer.
  3. Fig 1: Removing 2-3 Accumulator Piston Retainer
    GF0003535Courtesy of FORD MOTOR CO.
  4. Remove the accumulator piston and spring.
  5. Fig 2: Removing Accumulator Piston And Spring
    GF0003536Courtesy of FORD MOTOR CO.