LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 118 (Handles, Locks, Latches & Entry Systems) >> Removal & Installation >> Ignition Lock Cylinder - Functional >> Notes

Ignition Lock Cylinder - Functional: Notes

WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Ignition Lock Cylinder
GF0013256Courtesy of FORD MOTOR CO.
Item Part Number Description
1 3F609 Tilt wheel handle and shank
2 55929 Lower steering column shroud screws (3 required)
3 3530 Lower steering column shroud
4 3530 Shift selector boot (if equipped)
5 - Ignition key
6 15607 Passive Anti-Theft System (PATS) transceiver
7 - Ignition lock cylinder release pin (part of 11582)
8 11582 Ignition lock cylinder