LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (Exterior Lighting System) >> Diagnostic Tests >> STOPLAMPS >> Pinpoint Tests >> Pinpoint Test J: The Stoplamps Are On Continuously >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.

When the brake pedal is applied, the stoplamp switch closes and routes voltage to the high mounted stoplamp and the multifunction switch through circuit 10 (LG/RD). The multifunction switch then routes the voltage through circuits 9 (LG/OG) and 5 (OG/LB) to the LH and RH rear lamps, respectively.

This pinpoint test is intended to diagnose the following: