LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Mariner Base, 2.5 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (Exterior Lighting System) >> Diagnostic Tests >> Headlamps >> Pinpoint Tests >> Pinpoint Test E: The Flash-To-Pass Feature Is Inoperative >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.

The multifunction switch is supplied voltage from the central junction box (CJB) through circuit 910 (PK). When the multifunction switch is placed in the FLASH-TO-PASS position, the voltage is routed to the lighting control module (LCM) through circuit 12 (LG/BK).

This pinpoint test is intended to diagnose the following:

scientia non olet · About LEMON Manuals