Torque Specifications
WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Bellcrank stud | 250 | 185 | - |
| Bellcrank stud nut | 250 | 185 | - |
| Differential bearing cap bolt | 114 | 84 | - |
| Differential housing cover bolt | 45 | 33 | - |
| Differential housing cover tag bolt | 31 | 23 | - |
| Differential pinion bearing preload | 1.8-3.3 | - | 16-29 |
| Differential pinion shaft lock bolt | 30 | 22 | - |
| Differential ring gear bolt | 114 | 84 | - |
| Driveshaft flange bolts | 112 | 83 | - |
| Fill plug | 30 | 22 | - |
| Handle for Pinion Depth Gauge | 2.2 | - | 20 |
| Lower control arm nut | 150 | 111 | - |
| Rear brake anti-lock sensor bolt | 7 | 62 | |
| Rear stabilizer bar bolt | 25 | 18 | - |
| Rear stabilizer bar link nuts | 20 | 15 | |
| Shock absorber nut | 90 | 66 | - |
| Upper control arm nut | 105 | 77 | - |