DTC P260F: - Evaporative System Monitoring Processor Performance
DTC P260F: - EVAPORATIVE SYSTEM MONITORING PROCESSOR PERFORMANCE
| Description: | This DTC sets when a concern is detected internal to the powertrain control module (PCM). The microprocessor that controls the engine off natural vacuum (EONV) leak check monitor is separate from the main processor within the PCM. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Verify the PCM is at the latest calibration level. Reprogram if necessary. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test HX . | ||