DTC P1575: - Pedal Position Out Of Self Test Range
DTC P1575: - PEDAL POSITION OUT OF SELF TEST RANGE
| Description: | During key on engine off (KOEO) self-test, the powertrain control module (PCM) monitors the accelerator pedal position (APP) sensor inputs to determine if the APP1 and APP2 signals are less than an expected value. If either APP1 or APP2 is greater than the expected value, the DTC is set. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Repeat the self-test without applying the accelerator pedal. Make sure the floor mat is not interfering with the accelerator pedal. Diagnose any APP circuit DTCs first. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DK . | - | - |