DTC P1506: - Idle Air Control (IAC) OVERSPEED Error
DTC P1506: - IDLE AIR CONTROL (IAC) OVERSPEED ERROR
| Description: | This DTC is set when the powertrain control module (PCM) detects an engine idle speed that is greater than the desired RPM. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Disconnect the IAC valve and look for little or no change in engine RPM as an indication of a stuck or damaged valve. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test KE . | ||