DTC P0201, P0202, P0203, P0204, P0205, P0206, P0207, P208, P209: Injector Circuit/Open - Cylinder X
DTC P020X: - INJECTOR CIRCUIT/OPEN - CYLINDER X
| Description: |
NOTE:
x represents injector numbers 1 through 9. The comprehensive component monitor (CCM) monitors the operation of the fuel injector drivers in the powertrain control module (PCM). The test fails when the fuel injector circuitry is inoperative. |
||
| Possible Causes: |
|
||
| Diagnostic Aids: | PID Data Monitor INJx_F fault flags equals YES. This DTC is set when a concern is detected between the PCM and the fuel injector. |
||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test KG . | ||