DTC P0108: - Manifold Absolute Pressure (Map)/Barometric Pressure (BARO) Sensor High
DTC P0108: - MANIFOLD ABSOLUTE PRESSURE (MAP)/BAROMETRIC PRESSURE (BARO) SENSOR HIGH
| Description: | Sensor operating voltage is greater than 4.96 volts. As a result it failed above the maximum allowable calibrated parameter. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The VREF voltage should be between 4.0 and 6.0 volts. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DM . | ||