DTC P0097: - Intake Air Temperature Sensor 2 Circuit Low
DTC P0097: - INTAKE AIR TEMPERATURE SENSOR 2 CIRCUIT LOW
| Description: | Indicates the sensor signal is less than the self-test minimum. The intake air temperature 2 (IAT2) sensor minimum is 0.2 volt. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Monitor the IAT2 PID value. A typical IAT2 temperature should be greater than the IAT1 temperature. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DU . | ||