- Battery Condition and Current Draw
|
- Visual. REFER to the Workshop Manual Section 414-00, Charging System and carry out the Inspection and Verification to continue diagnosis.
|
- Secondary Ignition System
|
- For vehicles equipped with a coil pack ignition system, refer to PINPOINT TEST JC - Secondary Ignition (Coil Pack)
.
- For all others, refer to PINPOINT TEST JB - Secondary Ignition (COP)
.
|
- Fuel Delivery System
|
- refer to PINPOINT TEST HC - Fuel Delivery System
.
|
- Exhaust System
|
- refer to PINPOINT TEST HF - Catalyst Efficiency Monitor and Exhaust Systems
.
|
- PCV System
|
- refer to PINPOINT TEST HG - Positive Crankcase Ventilation (PCV) System
.
|
- EVAP System
|
- refer to PINPOINT TEST HX - Evaporative Emission (EVAP) Monitor and System
.
|
- Intake Air System
|
- refer to PINPOINT TEST HU - Intake Air Systems
.
|
- Starting System
|
- REFER to the Workshop Manual Section 303-06, Starting System and diagnose the engine cranks slowly symptom.
|
- MAF Sensor
|
- refer to PINPOINT TEST DC - Mass Air Flow (MAF) Sensor
.
|
- Additional Testing
|
- refer to PINPOINT TEST Z - Intermittent
.
|
- Additional Checks:
- For vehicles equipped with 2 camshaft position (CMP) sensors, verify the CMP1 and CMP2 circuits are not shorted together.
|
- Visual
|