Torque Specifications
WARNING: This page is about a different variant/trim than selected.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Camshaft Position (CMP) sensor bolt | 7 | - | 62 |
| Catalyst monitor sensor | 48 | 35 | - |
| Crankshaft Position (CKP) sensor boltsa | - | - | - |
| Cylinder block plug | 20 | - | 177 |
| Cylinder Head Temperature (CHT) sensor | 12 | - | 106 |
| Heated Oxygen Sensor (HO2S) | 48 | 35 | - |
| Knock Sensor (KS) bolt | 20 | - | 177 |
| Manifold Absolute Pressure (MAP) sensor screw | 3 | - | 27 |
| Mass Air Flow (MAF) sensor screws | 2 | - | 18 |
| PCM bolts | 8 | - | 71 |
| Variable Camshaft Timing (VCT) oil control solenoid bolt | 10 | - | 89 |
a Refer to the procedure.