LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Electronic Engine Controls - 2.3L) >> Removal And Installation >> Clutch Pedal Position (CPP) Switch

Clutch Pedal Position (CPP) Switch

WARNING: This page is about a different variant/trim than selected.
Fig 1: Exploded View Of Clutch Pedal Position (CPP) Switch
GF0029437Courtesy of FORD MOTOR CO.
Item Part Number Description
1 - Clutch Pedal Position (CPP) switch electrical connector (part of 14290)
2 7C534 CPP
  1. Disconnect the Clutch Pedal Position (CPP) switch electrical connector.
  2. Rotate the CPP switch clockwise and remove the CPP switch.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals