LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Clutch Control System) >> Removal And Installation >> Clutch Slave Cylinder >> Notes

Clutch Slave Cylinder: Notes

WARNING: This page is about a different variant/trim than selected.
Material

Item Specification
High Performance DOT 3 Motor Vehicle Brake Fluid
PM-1 or PM-1-C (US); CPM-1 or CPM-1-C (Canada)
ESA-M6C25-A or WSS-M6C62-A
Premium Long-Life Grease
XG-1-C or XG-1-K (US); CXG-1-C (Canada)
ESA-M1C75-B
Fig 1: Exploded View Of Clutch Slave Cylinder With Torque Specifications
GF0029942Courtesy of FORD MOTOR CO.
Item Part Number Description
1 7T504 Clutch hydraulic line
2 7A508 Clutch slave cylinder
3 - Clutch slave cylinder bolts (2 required)