LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Clutch Control System) >> Removal And Installation >> Clutch Master Cylinder >> Notes

Clutch Master Cylinder: Notes

WARNING: This page is about a different variant/trim than selected.
Material

Item Specification
High Performance DOT 3 Motor Vehicle Brake Fluid
PM-1-C (US); CPM-1-C (Canada)
WSS-M6C62-A
Fig 1: Exploded View Of Clutch Master Cylinder With Torque Specifications
GF0041479Courtesy of FORD MOTOR CO.
Item Part Number Description
1 14A464 PCM electrical connector
2 W505428-S PCM bolt (4 required)
3 12A650 PCM
4 N804795-S PCM bracket nut (3 required)
5 12A659 PCM bracket
6 - Clutch hydraulic line
7 7A543 Clutch master cylinder
8 - Clutch master cylinder nut
9 2K478 Clutch system reservoir
10 7519 Clutch pedal and bracket
11 - Clutch master cylinder nut