LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Handles, Locks, Latches And Entry Systems -- F250-F550 Super Duty) >> Removal And Installation >> Interior Door Handle - Front >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front door trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  2. Remove the nuts and the interior front door handle.
    Fig 1: Removing Nuts And Interior Front Door Handle
    G03911830Courtesy of FORD MOTOR CO.
    3. NOTE: If a new component is to be installed, refer to the Ford Master Parts Catalog for specific part information.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals