LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 846 (Climate Control System - General Information And Diagnostics - F250-F550) >> Diagnostic Tests >> Climate Control System >> Pinpoint Tests >> Pinpoint Test H: Insufficient, Erratic Or No Heat >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Under normal operation, the automatic temperature control (ATC) solenoid and manifold receives a ground from the electronic automatic temperature control (EATC) module through circuit 1106 (LG/WH). When the heater control valve vacuum solenoid is to be energized, the ATC solenoid and manifold receives power from the EATC module through circuit 1111 (VT).

Possible Causes