LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 839 (Instrument Cluster System (F250-F550)) >> Diagnostic Tests >> Instrument Cluster (IC) >> Pinpoint Tests >> Pinpoint Test O: The High Beam Indicator Is Never On >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The high beam indicator bulb receives voltage through circuit 12 (LG/BK) when the multifunction switch is placed in the high beam position. The high beam indicator bulb is grounded through the instrument cluster bulb ground circuit 57 (BK).

Possible Causes

scientia non olet · About LEMON Manuals