PID/Data Monitor and Record
WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
The PID/Data Monitor and Record option allows the scan tool operator to read the state of several PIDs to aid in diagnosing the system. PIDs are real-time measurements of parameters such as voltages, resistances, etc., calculated by the RCM and sent to the scan tool for display. Many of the PIDs supported by the RCM are calculated periodically and are, therefore, not true real-time readings.
To retrieve PIDs, follow these steps:
- Connect the scan tool to the DLC.
- Turn the ignition switch to the ON position.
- Follow the manufacturer's instructions for the scan tool being used.
- Record all PIDs that are to be retrieved and initiate PID retrieval. PIDs are updated continuously on the display.