LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 821 (Handles, Locks, Latches And Entry Systems (F250-F550)) >> Removal And Installation >> Interior Door Handle - Rear, Crew Cab >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear door trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION article.
  2. Position the watershield aside.
    3. Fig 1: Interior Rear Door Handle Cover Clips
    GF0005314Courtesy of FORD MOTOR CO.
  3. Release the 2 clips and release the interior rear door handle cover.
  4. Remove the 2 nuts and the interior door handle.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals