LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 818 (Exterior Lighting System (F250-F550)) >> Removal And Installation >> Headlamp Assembly >> Removal And Installation >> Sealed beam

Sealed beam

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the side lamp/front turn signal lamp. For additional information, refer to Side Lamp/Front Turn Signal Lamp Bulb .
  2. Remove the 4 screws and the headlamp retaining ring.
  3. Remove the headlamp assembly.
    • Disconnect the electrical connector.
scientia non olet · About LEMON Manuals