LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 818 (Exterior Lighting System (F250-F550)) >> Diagnostic Tests >> Turn Signal and Hazard Lamps >> Pinpoint Tests >> Pinpoint Test L: One Turn Signal/Hazard Lamp Is Inoperative >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

When the multifunction switch is placed in the LH or RH TURN position, voltage is routed through circuit 3 (LG/WH) (LH front turn lamps) or circuit 2 (WH/LB) (RH front turn lamps). The turn lamps receive ground through circuit 57 (BK).

Possible Causes