LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 818 (Exterior Lighting System (F250-F550)) >> Diagnostic Tests >> Turn Signal and Hazard Lamps >> Pinpoint Tests >> Pinpoint Test K: The Turn Signal Lamps Are Inoperative >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The electronic flasher receives voltage from the central junction box (CJB) fuse 27 (15A) through circuit 295 (LB/PK). Voltage is then routed to the multifunction switch through circuit 44 (LB) (turn lamps) and circuit 385 (WH/RD) (hazard lamps). When the multifunction switch is placed in the LH or RH TURN position, voltage is routed to the appropriate turn lamps. The electronic flasher receives ground through circuit 57 (BK).

Possible Causes