LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 818 (Exterior Lighting System (F250-F550)) >> Diagnostic Tests >> Headlamps >> Pinpoint Tests >> Pinpoint Test F: The Flash-To-Pass Feature Is Inoperative >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The multifunction switch receives voltage from the central junction box (CJB) through circuit 196 (DB/OG). When the flash-to-pass feature is enabled, the multifunction switch routes the voltage to the high beam headlamps.

Possible Causes

scientia non olet · About LEMON Manuals