All vehicles

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the blower motor electrical connector.

Fig 1: Identifying Blower Motor Electrical Connector
Courtesy of FORD MOTOR CO.
Remove the blower motor ventilation tube.

Fig 2: Removing Blower Motor Ventilation Tube
Courtesy of FORD MOTOR CO.
Remove the screws and remove the blower motor.

Fig 3: Removing Blower Motor
Courtesy of FORD MOTOR CO.

CAUTION: If the wheel is to be reused, clean the corrosion from the shaft end prior to removing the wheel.

Fig 4: Identifying Wheel From Blower Motor

Courtesy of FORD MOTOR CO.

Remove the wheel from the blower motor.
- Remove the push clip.
- Remove the wheel from the blower motor.
To install, reverse the removal procedure.