Catalyst Monitor Sensor: Removal
WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
- Disconnect the catalyst monitor sensor electrical connector.
- Using the special tool, remove the catalyst monitor sensor.
- Apply penetrating lubricant to the catalyst monitor sensor to assist in removal.