LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 761 (Automatic Transmission External Controls - F150 & Mark LT) >> Removal And Installation >> Selector Lever Cable - Column Shift >> Installation >> Vehicles equipped with 4.2L engines

Vehicles equipped with 4.2L engines

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the shift cable bracket.
    • Install the bolt.
      • Tighten to 40 Nm (30 lb-ft).
    • Install the nut.
      • Tighten to 40 Nm (30 lb-ft).
    2. Fig 1: Locating Shift Cable Bracket Bolt And Nut
    GF0003803Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals