Gasoline vehicles

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Both fuel level sensor wires must be routed behind the metal fuel level sensor plate.

NOTE: The grounding eyelet must be on the front side of the fuel level sensor.

Hook the fuel level sensor on the fuel pump module and install the screw through the grounding eyelet and tighten the screw.

Fig 1: Locating Grounding Eyelet Screw

Courtesy of FORD MOTOR CO.