Flexible fuel vehicles

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: One fuel level sensor wire routes behind the fuel level sensor and one routes along the left side of the fuel level sensor.

NOTE: The grounding eyelet must be on the front side of the fuel level sensor.

Hook the fuel level sensor on the fuel pump module and install the screw through the grounding eyelet and tighten the screw. Clip the wire into the clip on the fuel pump module.

Fig 1: Locating Grounding Eyelet

Courtesy of FORD MOTOR CO.