LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 741 (Safety Belt System - F-150 & Mark LT) >> Removal And Installation >> Safety Belt Retractor - Front, Without Seat Integrated Restraints (SIR) >> Passenger retractor

Passenger retractor

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. When servicing the passenger safety belt retractor, depower the SRS. For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering in the General Procedures portion of SUPPLEMENTAL RESTRAINT SYSTEM article.


  1. When servicing the passenger safety belt retractor, disconnect the belt tension sensor (BTS) electrical connector.


  1. When servicing the passenger safety belt retractor, repower the SRS. For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering in the General Procedures portion of SUPPLEMENTAL RESTRAINT SYSTEM article.