LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 732 (Instrument Cluster System) >> Diagnostic Tests >> Instrument Cluster (IC) >> Pinpoint Tests >> Pinpoint Test W: The Traction Control Indicator Is Never/Always On >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

The traction control indicator informs the driver that a traction control event is taking place, by flashing the indicator. It is also used to indicate a malfunction in the traction control system, or if the traction control has been disabled by the operator, by illuminating the indicator constantly (not flashing). The instrument cluster receives the traction control status from the anti-lock brake system (ABS) module over the communication network.

Possible Causes