Removal And Installation

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Remove the audio unit. For additional information, refer to INFORMATION AND ENTERTAINMENT SYSTEMS article.
While pushing the glove compartment door tab, position the glove compartment downward.

Fig 1: Locating Glove Compartment Downward

Courtesy of FORD MOTOR CO.

Remove the 3 temperature blend door actuator screws.
Detach the temperature blend door actuator.
Disconnect the temperature blend door actuator electrical connector.
To install, reverse the removal procedure.