LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 722 (Information And Entertainment Systems) >> Removal And Installation >> Subwoofer Amplifier >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the speaker enclosure. For additional information, refer to Speaker Enclosure  in this article.
  2. Disconnect the subwoofer amplifier electrical connector.
  3. Remove the 4 screws and the subwoofer amplifier.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals