Window Regulator and Motor - Rear: Removal
WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the rear window glass. For additional information, refer to Window Glass - Rear in this article.
- Disconnect the rear window glass motor electrical connector.
- Remove the rear window glass regulator and motor assembly screws.
- To install, tighten to 11 Nm (8 lb-ft).
- Remove the rear window glass regulator and motor assembly from the vehicle.
- To install, reverse the removal procedure.