LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 708 (Electronic Engine Control System - F-150 & Mark LT) >> Removal And Installation >> Heated Oxygen Sensor (HO2S) and Catalyst Monitor Sensor - Exploded View, 4.6L (2V) and 5.4L (3V)

Heated Oxygen Sensor (HO2S) and Catalyst Monitor Sensor - Exploded View, 4.6L (2V) and 5.4L (3V)

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Heated Oxygen Sensor (HO2S) And Catalyst Monitor Sensor - 4.6L (2V) And 5.4L (3V)
GF0002935Courtesy of FORD MOTOR CO.
Item Part Number Description
1 14A464 Heated oxygen sensor (HO2S) electrical connectors (2 required)
2 14A464 Catalyst monitor sensor electrical connectors (2 required)
3 9F472 HO2S (2 required)
4 9G444 Catalyst monitor sensors (2 required)
  1. For additional information, refer to the procedures in this article.