Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

Remove the rear interior lamp lens.

Fig 1: Identifying Rear Interior Lamp Lens
Courtesy of FORD MOTOR CO.
Release the 2 retaining clips (through the access holes) and remove the rear interior lamp assembly.
- Disconnect the electrical connector.
  
  Fig 2: Locating Electrical Connector Retaining Clips
  Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.