LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 647 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Interior Door Handle - Front >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front door trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  2. Remove the interior front door handle screw.
  3. Disconnect the front door interior door handle actuating cable and remove the interior door handle.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals