LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 647 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Exterior Front Door Handle >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the grommet from the rear of the front door.
  2. Remove the screw and the exterior front door handle cover.
    3. NOTE: Pull the exterior front door handle outward and to the rear to release it from the front door handle reinforcement.
  3. Remove the exterior front door handle.
  4. If required, remove the 2 exterior front door handle seals.
    Fig 1: Locating Exterior Front Door Handle
    G04683725Courtesy of FORD MOTOR CO.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals